You are not logged in.     |  login  | 

Welcome to the Blackhawk XDS100 Support Area

This page contains information on all the Blackhawk XDS100-class models.  This includes, but is not limited to v1, v2, v2D, and ARM models.  Below are pictures and links to the appropriate download section.  Just locate the image that matches your product and click its link to scroll down to the information for that model.

 

 

usb100

 

usb100v2

This is a version 1 device and can also be identified by a serial number beginning with NBxxxx.

This is a version 2 device and can also be identified by a serial number beginning with NCxxxx (where xxxx is 2499 and under).

This is a version 2, model D device that can also be identified by its 5 in. ribbon cable, 20-pin cTI JTAG and mini-USB connectors, and a serial number beginning with NCxxxx or NDxxxx (where xxxx is 2500 and over).

This is a version 2, ARM model device that can be identified by its 20-pin and 10-pin ARM ribbon connections and a serial number beginning with NExxxxx.

CCS v3.3 Note

XDS100v2-class products are design to be used with CCS v4 and later. Not all XDS100v2 products can be used with CCS v3.3. Please contact your XDS100 vendor for more details.


XDS100 Downloads

XDS100 Controller

 

This section includes information and updates for the original XDS100 product (also know as XDS100v1). You can identify these units by the picture above that have a serial number starting with "NB". If you are not sure about the model you have, please contact Blackhawk for clarification.

 

Firmware Date Version File Size Download

Product Upgrade to Version 2

This firmware package will convert your Blackhawk USB100 version 1 hardware into a version 2 product. Updating to version 2 will require the use of CCS v4, and increase the number of compatible devices.

The distribution includes all the files and directions needed to update the unit via USB connection. No special programming hardware is necessary.

This upgrade also includes the XDS100v2 CPLD update.

June 2010 v1.0 1.93MB Download

XDS100v2 Downloads

XDS100v2 Controller

 

This section includes information and updates for the original XDS100v2 product. You can identify these units by the picture above that have a serial number starting with "NCxxxx", where xxxx is 2499 and under. If you are not sure about the model you have, please contact Blackhawk for clarification.

 

Firmware Date Version File Size Download

CPLD Firmware Upgrade

This upgrade will update the CPLD component of the product.

This firmware change has been made in support of --some detected problems-- with TI ARM-based devices with adaptive clocking return clocks (i.e. OMAP-L138 with an ARM9 processor core). Unless you are currently experiencing a problem with a TI ARM-based device, you will not see any difference with this update.

The distribution includes all the files and directions needed to update the unit via USB connection. No special programming hardware is necessary.

June 2010 v1.0 1.93MB Download

XDS100v2D Downloads

XDS100v2D Controller

 

This section includes information and updates for the USB100v2 Model D product (also know as XDS100v2D). You can identify these units by the picture above that have a serial number starting with "NCxxxx" or "NDxxxx" where xxxx is 2500 and over. If you are not sure about the model you have, please contact Blackhawk for clarification.

 

Firmware Date Version File Size Download

CPLD Firmware Upgrade

This upgrade will update the CPLD component of the product.

This firmware change has been made in support of --some detected problems-- with TI ARM-based devices with adaptive clocking return clocks (i.e. OMAP-L138 with an ARM9 processor core). Unless you are currently experiencing a problem with a TI ARM-based device, you will not see any difference with this update.

The distribution includes all the files and directions needed to update the unit via USB connection. No special programming hardware is necessary.

Units with serial numbers that begin with "ND" were programmed at the factory with this update. Re-applying this update will not change the device. 

July 2010 v2010.07.20 361KB Download

Rollback2v1 and Upgrade2v2

This package contains all the necessary files to configure your Blackhawk XDS100v2 controller as a version 1 or version 2 product. Yes, you can configure you product for use with CCS v3.3 or v4 quickly and easily.

The distribution includes all the files and directions needed to update the unit via USB connection. No special programming hardware is necessary.

July 2010 v2010,07.20 456KB Download

CCS v3.3 Note

XDS100v2-class products are design to be used with CCS v4 and later. Not all XDS100v2 products can be used with CCS v3.3. Please contact your XDS100 vendor for more details.


XDS100v2-ARM Downloads

XDS100v2-ARM Controller

 

This section includes information and updates for the USB100v2-ARM product (also know as XDS100v2-ARM). You can identify these units by the picture above that have a serial number starting with "NExxxxx". If you are not sure about the model you have, please contact Blackhawk for clarification.

NOTE: The following updates are written for the USB100v2 Model D controller. They also apply to the ARM version.

 

Firmware Date Version File Size Download

CPLD Firmware Upgrade

This upgrade will update the CPLD component of the product.

This firmware change has been made in support of --some detected problems-- with TI ARM-based devices with adaptive clocking return clocks (i.e. OMAP-L138 with an ARM9 processor core). Unless you are currently experiencing a problem with a TI ARM-based device, you will not see any difference with this update.

The distribution includes all the files and directions needed to update the unit via USB connection. No special programming hardware is necessary.

Units with serial numbers that begin with "ND" were programmed at the factory with this update. Re-applying this update will not change the device. 

July 2010 v2010.07.20 361KB Download

Rollback2v1 and Upgrade2v2

This package contains all the necessary files to configure your Blackhawk XDS100v2 controller as a version 1 or version 2 product. Yes, you can configure you product for use with CCS v3.3 or v4 quickly and easily.

The distribution includes all the files and directions needed to update the unit via USB connection. No special programming hardware is necessary.

July 2010 v2010,07.20 456KB Download

CCS v3.3 Note

XDS100v2-class products are design to be used with CCS v4 and later. Not all XDS100v2 products can be used with CCS v3.3. Please contact your XDS100 vendor for more details.